With the new SpectroDens generation TECHKON continues the success story of the SpectroDens hand-held devices in the long term. The dictum during product development was: Pursue proven concepts and integrate new meaningful technologies. The result sets a new standard. SpectroDens is an all-purpose, modern measurement device for every application - from pre-press to print. It combines the qualities of a highly accurate spectrophotometer and an easy-to-use densitometer.
The entire color information - the spectral fingerprint of the color - is precisely registered. The device works strictly according to the standards valid for the Graphic Industry. It is particularly good at evaluating the Ugra/FOGRA-media wedge because it toggles between colorimetric measurement without polarization filter and density measurement with filter at the push of a button. The Windows software SpectroDens Connect supplied with the instrument clearly displays measurement data collected from the USB-port on the computer screen.Techkon Duck Charger with Calibration Plate. Techkon SpectroDens Carrying Hard Case.
Patented measurement head for exact and direct positioning. Automatic measurement function displays always the relevant values.Polarization filter insertable by push of a button. 10,000 measurements per battery charge. Quick recharge on practical charging console. Measurement technology: Spectral remission measurement and color density determination to ISO 5-3/4 Measurement geometry: 0/45° optics to DIN 5033 Spectral range: 400 to 700 nm in 10 nm steps Measurement aperture: 3 mm round standard. 1,5 x 1,5 mm, exchangeable (accessory), 2,5 x 1 mm, exchangeable (accessory) Light source: Gas-filled lamp type A illumination Polarization filter: Twice linear crossed, Switched on and off per button release Measurement time: Approx.
1 second per measurement White reference: Absolute and relative, Absolute white standard integrated and protected in charging console Illumination types /Standard Observer: A, C, D50, D65 / 2°, 10° Density filter: DIN 16536, DIN 16536 NB, ISO/ANSI T, ISO/ANSI I, ISO E, Dmax (Advanced and Premium models only) Density measurement range: 0.00 D -2.50 D Repeatability: 0,01 D, 0,03 CIE dEab Inter-instrument agreement: 0,01 D, 0,3 CIE dEab Display: High-contrast, non-reflecting, LCD-graphic display, 240 x 160 pixels, 16 gray levels, contrast adjustable Power supply: Rechargeable NiMH battery, regulated recharge via charging console with A/C adapter, 100 -240 V, 47-63 Hz, Approx. 10,000 measurements per battery charge, Battery level control Communication-Port: USB. Designated trademarks, brand names and brands appearing in our ads, are the property of their respective owners.This item is in the category "Business & Industrial\Printing & Graphic Arts\Printing & Graphic Essentials\Densitometers". The seller is "smartbuysonly-com" and is located in this country: US. This item can be shipped worldwide.