Graphiste

X-rite 310TR Transmission Reflection Color Densitometer 310 Base & 310-06 Head


X-rite 310TR Transmission Reflection Color Densitometer 310 Base & 310-06 Head
X-rite 310TR Transmission Reflection Color Densitometer 310 Base & 310-06 Head
X-rite 310TR Transmission Reflection Color Densitometer 310 Base & 310-06 Head
X-rite 310TR Transmission Reflection Color Densitometer 310 Base & 310-06 Head

X-rite 310TR Transmission Reflection Color Densitometer 310 Base & 310-06 Head    X-rite 310TR Transmission Reflection Color Densitometer 310 Base & 310-06 Head

X-Rite 310TR Transmission Reflection Color Densitometer Transmission base and Reflection Head. Excellent condition, Very clean, Unlikely to find a better condition unit working great.

X-Rite 310-06 Reflection Head reader. The X-Rite 310 simplifies your process control readings, allowing you to take an accurate series of readings in less than a minute. Two technological features make this possible. Our unique optical design enables you to electronically not manually.

Switch from one color channel to another. This feature also allows the instrument to read and display the values for all colors : visual, red, green, and blue. The instrument automatically recognizes and measures only the dominant color that is being read. When you move from one reading to the next, the 310 automatically responds to color changes.

EFS and auto color measurement deliver the performance advantages you need to quickly plot the numbers used to monitor your color print processor control strips. Instrument also reads density differences, enhancing its automatic color measurement capabilities.

Off-easel negative evaluation capability gives you the color balance needed to produce quality prints from a wide range of negatives. The 310 includes five memories for storing commonly used target densities. Access to these standard color values is fast and convenient. The 310 can interface with computerized photofinishing systems such as the Kodak® TECHNET® system.

It can also interface with a dot matrix printer. Allows nulling (zeroing) on a standard, base density, or other measurement while measuring density or density x 10.

Allows simple keyboard selection of Status A or Status M response for transmission densitometry. Calibration method is extremely simple. Calibrations for each status are stored in memory.

The superior optical design minimizes dust and dirt to reduce errors and increase sensitivity and accuracy. The instrument has a quick warm-up time of just two minutes.


X-rite 310TR Transmission Reflection Color Densitometer 310 Base & 310-06 Head    X-rite 310TR Transmission Reflection Color Densitometer 310 Base & 310-06 Head